FastWarm® heating cable kits are industry leading heating systems that can be used as a secondary heat source (when used in conjunction with FastWarm® XPS or Tile backer boards, the warm up time will and running costs can be reduced as much as 25%) providing an effective solution to radiant heating under almost any floor covering and in any room type.
FastWarm® heating cables comprise of the thinnest (2mm) fluoropolymer (Teflon) coated, dual-core resistive heating cable on the market. The cables can be spaced at an appropriate distance to provide an even heat distribution across the floor to suit the required heat output. The cable system allows for use in small confined areas (bathrooms and en suites) plus complicated shaped areas, making fitting a FastWarm® underfloor heating cable suitable for any DIY enthusiast. Please note; all electrical connections should be undertaken by a qualified electrician.
- Fastwarm® high quality ETFE advanced insulation heating cables are only made with premium quality Fluoropolymer material and DO NOT contain any PVC outer sheathing whatsoever.
- Fastwarm® cables are only 2mm in thickness meaning they are one of the thinnest on the market today.
- The advantage of Fastwarm® ultra-thin cable means that tiles can be directly laid on top if needed.
- Fastwarm® cable heating systems are constructed using a multi strand wire composite making them extremely durable and very strong
FastWarm® heating cable kits come with everything required to install the FastWarm® underfloor heating system, meaning there is no need for any additional components. Everything you need in a box.
FastWarm® heating cable kits come with a peace of mind lifetime guarantee (50 years) as we only use the highest quality components sourced across the globe. FastWarm® heating cables do not utilise PVC as an outer coating which are an inferior casing, meaning you can rest assured that once installed, your FastWarm® underfloor heating system will last a lifetime.
Please note - electric underfloor heating elements cannot be shortened or cut, so when calculating the correct size for an area please select a cable system that only covers up to 90% of the total floor space.
Fastwarm® loose cable kits include the following: -
FastWarm® Loose Cable
2mm cable, easy to install in confined and awkward shaped areas.
1 drum up to 9m2
2 drums over 9m2
1 x Fastwarm® Programmable Thermostat
Choice of Digital, Touchscreen and WiFi controllers in white or black. All supplied with a 3m floor sensor probe
Fastwarm® Fastprime Primer
A water based acrylic primer, which is used to prime the substrate/insulation board to aid bonding and reduce moisture
1 x Roller and Foam head
To apply the Fastprime Primer
Duct Tape
Heat resistant duct tape to aid installation and fix any loose laid heating cable
1 x 2m Conduit length
To house the floor sensor prob
Please note - electric underfloor heating elements cannot be shortened or cut, so when calculating the correct size for an area please select a cable system that only covers up to 90% of the total floor space.
- Ensure the subfloor is structurally sound and free of all dust and debris. Prime the subfloor using the primer supplied in the kit (or sold separately) If using /Tile Backer or XPS insulation boards, please refer to their specific installation guide.
- Before laying the cable please test the resistance values against the chart in the install guide. Please do not unroll the cable until you have carried out this test. Also check the size of the area to be heated to ensure the cable will fit. Unrolled cables cannot be returned.
- Depending on the output of the cable, mark out cable spacings (50mm, 67mm or 100mm) across the floor as a guide to lay the cable. Using the grey duct tape supplied, tape the cable in place at regular intervals especially on loops to ensure the cable is secured in place.
- Once the cable has been laid, carry out the resistance test again to confirm the values are the same. This ensures the cable hasn’t been damaged during installation.
- Once these tests have been confirmed, we recommend you cover the cables with a thin layer of suitable latex based levelling compound (8-10mm if you are using vinyl as a final floor covering). This will help protect the cables. You may install your floor covering directly over the cables, however extra care must be taken not to dislodge the cables or to damage the cable in anyway.
Fastwarm™ 200w Underfloor Heating cable @ 50mm spacings provide the following:
- 2mm thick cable complies to IEC 60335 standards and is also UKCA approved.
- Evenly spaced Fluropolymer dual core heating elements which ensure consistent desired heat output.
- Fastwarm’s unique cable system incorporates a built in return which allows for a single connection to the thermostat.
- 2m flexible two core power lead (cold tail) which is surrounded by earth braiding and encapsulated in an insulated outer sheath.
- Primary Heat Source when used in conjunction with sufficient insulation provides super-fast heat up times
- Compatible with any shaped floor space with the mats designed for a quick and easy installation due to its versatility.
Fastwarm Digital
The Fastwarm Digital Programable is a ultra-modern 7 day programmer which can be used for air, floor or air & floor.
The contemporary design offers white luminous backlight for low light areas and touch sensitive keys for that sleek feel.
- Lifetime warranty (50 years)
- Comes equipped with 3m floor sensor probe
- Fahrenheit/Celsius modes
- Adaptive start learning function
- Switched up to 3600w (16amp @ 230v AC)
- 7 day programme
| IP rating | IP21 |
|---|---|
| Max Load | 16A |
| Supply voltage | 230v |
Fastwarm Touch
The Fastwarm Touch screen thermostat has an ultra-sleek, minimal design and chrome surround.
Fastwarm Touch Screen can switch up to 3600w / 16amps and comes supplied with a 3m floor sensor probe to regulate floor temp.
Available in either Black orWhite and has a full glass display with touch sensitive control.
- Supplied with a 3m floor sensor probe
- Window open detection
- Holiday setting enabled
- Can switch up to 3600w (16amps)
- Frost protection enabled
- 5/2 or 7 day program
| IP rating | IP21 |
|---|---|
| Max Load | 16A |
| Supply voltage | 230v |
Fastwarm Wifi
The Fastwarm Smart Wifi White Thermostat is used to control your Electric underfloor heating system.
This Thermostat pairs to your home WIFI using an application which is available from both Android and IOS platforms.
Once paired, you will be minimising energy use as well as having your home remain at a comfortable temperature.
- WIFI Control
- Programmable
- Professional design
- Hold function
- Floor Temperature Limitation
- Power Consumption Monitor (APP)
- Large Screen
| IP rating | IP21 |
|---|---|
| Max Load | 16A |
| Supply voltage | 230v |
Free Delivery as Standard!
As standard we include 2 - 3 working day delivery on all orders delivered to the UK mainland. * A £5 delivery charge will be applied to all orders below £20.
Delivery cut off times
Our final delivery time for Mondays to Thursday is 4:30pm. To give us a bit more time to ensure weekend deliveries are handled and our couriers have time to collect, the final delivery time on Fridays is 4:00pm.
2-3 working day delivery
Next working day
Next working day before 10:30
Saturday Delivery
* A £5 delivery charge will be applied to all orders below £20.
Other Delivery Options
Pre 10:30am and Saturday delivery services are available on orders placed before 4:30pm. Any order placed before 4:30pm on a Friday will be delivered on the following Monday (unless its a bank holiday) so please select a Saturday service if a weekend delivery is required.
Delivery outside the UK
Delivery outside the mainland UK may be arranged by prior agreement. You will be notified of the amount of the charge for this service and will at that point have to make a decision whether you wish to proceed wth your order.
Important: Our deliveries rely on third party couriers, so, whilst we make every effort to deliver your order on the specified date and time, unfortunately there may be occasions when this will not be possible due to external influences. Due to this we strongly recommend you ensure you have received your order before any tradespeople/builders are scheduled to commence work.
Still Unsure? Talk to an expert
If you need any guidance or further information our highly experienced team are on hand to help.
Get in touch using our contact form or give us a call on 0800 023 4203 or 01268 744 479.
