Single Zone Systems
Fastwarm® Single Zone Water Kits are used on projects when a single thermostat is required. These systems are available in both Standard output for those well insulated new builds or High output where there maybe a greater heat loss such as multiple external wall or large areas of glass. Designed for installation within screeds however can be used also with the Fastwarm® 2 Groove Spreader Plates if installing onto a joisted floor.
Fastwarm® Standard Output Water Underfloor Heating Kits are designed for installation in well insulated areas or internal rooms as pipe centres are @ 250mm spacings.
Fastwarm® Single Zone FastTile+ Water Underfloor Heating Kits are designed for ultra low profile retro fit installations in one Zone (area) and come with only one thermostatic controller. Meaning regardless of how big the area/how many rooms, the system will act as one and be controlled as one zone.
Fastwarm® Single Zone Water Underfloor Heating Injoist Batten Kits are designed for installations between joists, for areas being installed as one Zone (area)
Supplied with 1 thermostat to control an individual zone.
Kit sizes range from 10m2 to 80m2
Fastwarm® High Output Water Underfloor Heating Kits are designed for installation in high heat loss areas such as conservatories or rooms with many external walls and lots of glass etc as pipe centres are @ 200mm spacings.
High Output Systems are supplied with Fastwarm Pipe Staples for use within a screed.
Supplied with 1 thermostat to control an individual zone.
Kit sizes range from 10m2 to 80m2
Fastwarm® Ultra High Output Water Underfloor Heating Kits are designed for installation in areas where a higher output per square meter is required. Also suitable for low temperature heat sources such as Air Source Heat Pumps as pipe centres are @ 150mm spacings
Ultra High Output Systems are supplied with Fastwarm Pipe Staples for use within a screed.
Supplied with 1 thermostat to control an individual zone.
Kit sizes range from 15m2 to 120m2
Fastwarm® Standard Output Water Underfloor Heating Kits are designed for installation in well insulated areas or internal rooms as pipe centres are @ 250mm spacings.
Fastwarm® High Output Crate Water Kits are designed for easy installation using Fastwarm Egg Crate in high heat loss areas such as conservatories or rooms with many external walls and lots of glass etc as pipe centres are @ 200mm spacings.
Supplied with 1 thermostat to control an individual zone.
Kit sizes range from 10m2 to 80m2
Fastwarm® Ultra High Output Water Underfloor Heating Kits are designed for installation in areas where a higher output per square meter is required. Also suitable for low temperature heat sources such as Air Source Heat Pumps as pipe centres are @ 150mm spacings
Ultra High Output Systems are supplied with Fastwarm Pipe Staples for use within a screed.
Supplied with 1 thermostat to control an individual zone.
Kit sizes range from 15m2 to 120m2
Fastwarm™ Clip Track Standard Output Water Underfloor Heating Kits are designed for installation in areas such as conservatories or rooms with multiple external walls and lots of glass etc as pipe centres are @ 250mm spacings.
Fastwarm® High Output Clip Track Water Underfloor Heating Kits are designed for installation in areas such as conservatories or rooms with multiple external walls and lots of glass etc as pipe centres are @ 200mm spacings.
Fastwarm® Clip Track Ultra High Output Water Underfloor Heating Kits are designed for installation in areas such as conservatories or rooms with multiple external walls and lots of glass etc as pipe centres are @ 150mm spacings.
FastWarm® FastDeck Single Zone Water Underfloor Heating Kits are designed to provide a ultra low profile retro fit installation above joisted floors in one Zone (area) and comes with one thermostatic controller. Meaning regardless of how big the area/how many rooms, the system will act as one and be controlled as one zone. For multiple room or zone control, please refer to the Fastwarm® Multi Zone systems.
Fastwarm® Single Zone Water Underfloor Heating Spreader Plate Kits are designed for installations between joists, for areas being installed as one Zone (area).
Supplied with 1 thermostat to control an individual zone.
Kit sizes range from 10m2 to 80m2
Fastwarm® Ultra High Output Spreader Plate Water Underfloor Heating Kits are designed for installation between joists, for areas being installed as one Zone (area).
Ultra High Output Systems are supplied with Fastwarm Spreader Plates for installation between joists.
Supplied with 1 thermostat to control an individual zone.
Kit sizes range from 15m2 to 120m2
Still Unsure? Talk to an expert
If you need any guidance or further information our highly experienced team are on hand to help.
Get in touch using our contact form or give us a call on 0800 023 4203 or 01268 744 479.
