FastWarm® Underwood foil heating mat kits are industry leading heating systems that can be used as a primary heating source. When used in conjunction with FastWarm® XPS or Classic Underlay, the warm up time and running costs can be reduced as much as 25%. Making FastWarm® Underwood foil heating mats the perfect solution to radiant heating under engineered and laminate floors (please check recommended installation method).
FastWarm® 140w underwood heating mats comprise of the thinnest 2mm fluoropolymer (Teflon) coated, dual-core resistive heating cable on the market. The cables are encased between two layers of heat reflective aluminium foil. The specific spacing of the heating elements, encased by the two layers of aluminium foil provide even heat distribution. Making fitting the FastWarm® 140w underwood foil heating mat suitable for any DIY enthusiast. All electrical connections must be carried out by a qualified electrician.
- Fastwarm® high quality ETFE advanced insulation heating cables are only made with premium quality Fluoropolymer material and DO NOT contain any PVC outer sheathing whatsoever.
- Fastwarm® cables are only 2mm in thickness meaning they are one of the thinnest on the market today.
- Fastwarm® cable heating systems are constructed using a multi strand wire composite making them extremely durable and very strong
- All our mats are 500mm wide
FastWarm® underwood heating mat kits come with everything required to install the FastWarm® underfloor heating system, meaning there is no need for any additional components. Everything you need in a box.
FastWarm® underwood heating mats come with a peace of mind lifetime guarantee (50 years) as we only use the highest quality components sourced across the globe. FastWarm® heating systems do not utilise PVC as an outer coating which are an inferior casing, meaning you can rest assured that once installed, your fastwarm® underfloor heating system will last a lifetime.
Please note - electric underfloor heating elements cannot be shortened or cut, so when calculating the correct size for an area please select a cable system that only covers up to 90% of the total floor space.
The Fastwarm® Underwood heating mat system must be used with either XPS or Classic EPS Underlay insulation boards, please refer to their specific installation guide.
This product is NOT SUITABLE for use directly beneath LVT/Vinyl/Linos. When installing beneath these products Heatpak Dual Overlay must be used.
Fastwarm® underwood heating mat kits include the following: -
FastWarm® Underwood Heating Mat
2mm cable, encased between two layers of heat reflective aluminium foil for even heat distribution.
Mats are 500mm wide
1 mat up to 12m2
2 mats over 13m2
1 x Fastwarm® Programmable Thermostat
Choice of Digital, Touchscreen and WiFi controllers in white or black. All supplied with a 3m floor sensor probe
Duct Tape
To aid installation of mats to XPS or Classic Underlay insulation boards
Aluminium Bridging Tape
To provide earth continuity
1 x 2m Conduit length
To house the floor sensor prob
Please note - electric underfloor heating elements cannot be shortened or cut, so when calculating the correct size for an area please select a cable system that only covers up to 90% of the total floor space.
- Ensure the subfloor is structurally sound and free of all dust and debris. The Fastwarm wood mat system must be used with either XPS or Classic Underlay insulation boards, please refer to their specific installation guide.
- Before laying the mat, please test the resistance values against the chart in the install guide. Please do not unroll the mat until you have carried out this test. Also check the size of the area to be heated to ensure the mat will fit. Unrolled mats cannot be returned.
- Start unrolling the mat from the fused spur/thermostat location across the room until you reach the perimeter. Then cut the mat (NOT the cable) and turn 180 degrees to allow the mat to be rolled back towards the original start position. Continue this method until the heated area is covered.
- Once the mat has been laid, carry out the resistance test again to confirm the values are the same. This ensures the cable hasn’t been damaged during installation.
- Once these tests have been confirmed, you can install your floor covering.
Fastwarm™ underwood Heating mats provide the following:
- 2mm thick cable applied within our industry leading foil matting which complies to IEC 60335 standards and is also UKCA approved.
- Evenly spaced Fluropolymer dual core heating elements which ensure consistent desired heat output.
- Fastwarm’s unique cable system incorporates a built in return which allows for a single connection to the thermostat.
- 2m flexible two core power lead (cold tail) which is surrounded by earth braiding and encapsulated in a Insulated outer sheath.
- Primary / secondary heat source when used in conjunction with sufficient insulation provides super-fast heat up times
- Compatible with any shaped floor space with the mats designed for a quick and easy installation.
Fastwarm Digital
The Fastwarm Digital Programable is a ultra-modern 7 day programmer which can be used for air, floor or air & floor.
The contemporary design offers white luminous backlight for low light areas and touch sensitive keys for that sleek feel.
- Lifetime warranty (50 years)
- Comes equipped with 3m floor sensor probe
- Fahrenheit/Celsius modes
- Adaptive start learning function
- Switched up to 3600w (16amp @ 230v AC)
- 7 day programme
| IP rating | IP21 |
|---|---|
| Max Load | 16A |
| Supply voltage | 230v |
Fastwarm Touch
The Fastwarm Touch screen thermostat has an ultra-sleek, minimal design and chrome surround.
Fastwarm Touch Screen can switch up to 3600w / 16amps and comes supplied with a 3m floor sensor probe to regulate floor temp.
Available in either Black orWhite and has a full glass display with touch sensitive control.
- Supplied with a 3m floor sensor probe
- Window open detection
- Holiday setting enabled
- Can switch up to 3600w (16amps)
- Frost protection enabled
- 5/2 or 7 day program
| IP rating | IP21 |
|---|---|
| Max Load | 16A |
| Supply voltage | 230v |
Fastwarm Wifi
The Fastwarm Smart Wifi White Thermostat is used to control your Electric underfloor heating system.
This Thermostat pairs to your home WIFI using an application which is available from both Android and IOS platforms.
Once paired, you will be minimising energy use as well as having your home remain at a comfortable temperature.
- WIFI Control
- Programmable
- Professional design
- Hold function
- Floor Temperature Limitation
- Power Consumption Monitor (APP)
- Large Screen
| IP rating | IP21 |
|---|---|
| Max Load | 16A |
| Supply voltage | 230v |
Free Delivery as Standard!
As standard we include 2 - 3 working day delivery on all orders delivered to the UK mainland. * A £5 delivery charge will be applied to all orders below £20.
Delivery cut off times
Our final delivery time for Mondays to Thursday is 4:30pm. To give us a bit more time to ensure weekend deliveries are handled and our couriers have time to collect, the final delivery time on Fridays is 4:00pm.
2-3 working day delivery
Next working day
Next working day before 10:30
Saturday Delivery
* A £5 delivery charge will be applied to all orders below £20.
Other Delivery Options
Pre 10:30am and Saturday delivery services are available on orders placed before 4:30pm. Any order placed before 4:30pm on a Friday will be delivered on the following Monday (unless its a bank holiday) so please select a Saturday service if a weekend delivery is required.
Delivery outside the UK
Delivery outside the mainland UK may be arranged by prior agreement. You will be notified of the amount of the charge for this service and will at that point have to make a decision whether you wish to proceed wth your order.
Important: Our deliveries rely on third party couriers, so, whilst we make every effort to deliver your order on the specified date and time, unfortunately there may be occasions when this will not be possible due to external influences. Due to this we strongly recommend you ensure you have received your order before any tradespeople/builders are scheduled to commence work.
Still Unsure? Talk to an expert
If you need any guidance or further information our highly experienced team are on hand to help.
Get in touch using our contact form or give us a call on 0800 023 4203 or 01268 744 479.
