UH8
Heatmiser - UH8 Wiring Centre
220
Heatmiser - UH8 Wiring Centre
20% OFF

Heatmiser - UH8 Wiring Centre

The Heatmiser UH8 underfloor heating wiring centre is designed to work with our 4 channel 230v time clock (TM4) and 230v Set back thermostat (DS-SB) but equally could be used with any 230v room thermostat.

£208.99
Save
£259.99
Our Price
£76.99
each
inc vat
For delivery by order within...
0 DAYS
:
0 HOURS
:
0 MINS
:
0 SECS

Product Description

The Heatmiser UH8 underfloor heating wiring centre is designed to work with our 4 channel 230v time clock (TM4) and 230v Set back thermostat (DS-SB) but equally could be used with any 230v room thermostat.

Up to 8 zones can be controlled from the UH8. On board the UH8 are two heating time channels, each zone allows you to specify which time channel it should follow. 2 additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.

A simple slide switch makes zone 8 suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler.Up to 4 actuators can be connected to each zone.

  • Dimensions (LxHxD) 384x148x60mm

Installation Guide

The UH8 can be mounted directly to a wall using four screws or alternatively, the unit can be DIN rail mounted.

When DIN Rail mounting, you first need to insert the two clips provided on the back of the UH8.

  • On the back of the UH8, position the clip in the middle and slide down.
  • Points A and B locate in the corresponding holes and lock into place.
  • Locate the UH8 onto the DIN rail from the top.
  • Pull the clip down and push the bottom of the UH8 onto the DIN rail.
  • Releasing the clip will lock the UH8 in place on the DIN rail.

To remove the UH8, pull both clips down and remove from the DIN rail.

Product Specification

Thermostat Options

Please note due to staff training, our next day delivery deadline will be 3pm this Friday (1st March). We apologise for any inconvenience this may cause.

Free Delivery as Standard!

As standard we include 2 - 3 working day delivery on all orders delivered to the UK mainland. * A £5 delivery charge will be applied to all orders below £20.

Delivery cut off times

Our final delivery time for Mondays to Thursday is 4:30pm. To give us a bit more time to ensure weekend deliveries are handled and our couriers have time to collect, the final delivery time on Fridays is 4:00pm.

2-3 working day delivery

FREE*
If ordered before 4:30pm (conditions apply)

Next working day

£4.00
If ordered before 4:30pm (applies to orders over £19.99)

Next working day before 10:30

£15.00
If ordered before 4:30pm (conditions apply)

Saturday Delivery

£30.00
If ordered before 4:30pm (conditions apply)

* A £5 delivery charge will be applied to all orders below £20.

Other Delivery Options

Pre 10:30am and Saturday delivery services are available on orders placed before 4:30pm. Any order placed before 4:30pm on a Friday will be delivered on the following Monday (unless its a bank holiday) so please select a Saturday service if a weekend delivery is required.

Delivery outside the UK

Delivery outside the mainland UK may be arranged by prior agreement. You will be notified of the amount of the charge for this service and will at that point have to make a decision whether you wish to proceed wth your order.

Customer Reviews
Voluptate in consequat ut in incididunt veniam id ut dolor aliqua ut est ad adipisicing cupidatat ad ex officia.
Manuals & Spec Sheets
Videos

Still Unsure? Talk to an expert

If you need any guidance or further information our highly experienced team are on hand to help.

Get in touch using our contact form or give us a call on 0800 023 4203 or 01268 744 479.