UltraTileFix ProFlex S2 is a single part, rapid setting, flexible, fibre reinforced adhesive for wall and floor tiles. It is specially formulated with FibreBond technology, enhanced adhesion and flexibility, making it ideal for areas where movement or vibration can occur.
- Ideal for use with all tile types including brick slips, resin backed and quartz
- Formulated with FibreBond technology
- Ultimate S2 flexibility for timber floors including plywood and chipboard overlays, swimming pools and underfloor heating systems
Mixing
Once the substrate has been prepared, continue with the tiling installation.
UltraTileFix ProFlex S2 should be added slowly to clean water in a suitable clean mixing tub and mixed thoroughly using a drill/mixer and paddle to give a slump free, easily worked mortar consistency. Once mixed the mortar is immediately ready for use and has a pot life of approximately 60 minutes at 20˚C. Mix only sufficient material to be used within the pot life of the product. Do not remix or rewet/dilute product which has aged and is starting to thicken or set.
| Mixing Ratio | 20kg unit requires 4.0L of water. |
|---|
Application
Apply the adhesive to the required thickness (limits 3mm – 20mm) in areas up to 1m² at a time. For internal walls use a notched trowel to the following notch dimensions to provide solid rib lines:
| Mosaic tiles | 3mm x 3mm at 6mm centres |
|---|---|
| General wall tiles | 5mm x 5mm at 10mm centres |
| General floor tiles | 8mm x 8mm at 16 mm centres |
For floors and external applications we advise to use the solid bed method.
This involves applying a uniform bed of adhesive to the floor and "buttering" the back of the tile with the same adhesive. When the tiles are bedded with a twisting action, pressing firmly down it ensures 100% contact is made with both the floor and the tile.
When fitting tiles leave spaces between each of the tiles to allow for grouting (approx: walls 1mm – 3mm and floors 2mm – 12mm).
Before the tile adhesive sets clean off the excess adhesive from the face of the tile and grout joints with a clean damp cloth or sponge.
| Bed thickness | 3-20mm |
|---|---|
| Pot life | 60 minutes |
| Set time | 3.5 hours |
| mixing ratio | 20kg : 4.0L |
| Conforms to | C2F S2 EN 12004 and 12002 classification |
| Size | 20kg |
| Colour | Grey |
Free Delivery as Standard!
As standard we include 2 - 3 working day delivery on all orders delivered to the UK mainland. * A £5 delivery charge will be applied to all orders below £20.
Delivery cut off times
Our final delivery time for Mondays to Thursday is 4:30pm. To give us a bit more time to ensure weekend deliveries are handled and our couriers have time to collect, the final delivery time on Fridays is 4:00pm.
2-3 working day delivery
Next working day
Next working day before 10:30
Saturday Delivery
* A £5 delivery charge will be applied to all orders below £20.
Other Delivery Options
Pre 10:30am and Saturday delivery services are available on orders placed before 4:30pm. Any order placed before 4:30pm on a Friday will be delivered on the following Monday (unless its a bank holiday) so please select a Saturday service if a weekend delivery is required.
Delivery outside the UK
Delivery outside the mainland UK may be arranged by prior agreement. You will be notified of the amount of the charge for this service and will at that point have to make a decision whether you wish to proceed wth your order.
Important: Our deliveries rely on third party couriers, so, whilst we make every effort to deliver your order on the specified date and time, unfortunately there may be occasions when this will not be possible due to external influences. Due to this we strongly recommend you ensure you have received your order before any tradespeople/builders are scheduled to commence work.
Still Unsure? Talk to an expert
If you need any guidance or further information our highly experienced team are on hand to help.
Get in touch using our contact form or give us a call on 0800 023 4203 or 01268 744 479.
