Fastwarm® Single Zone Water Underfloor Heating Spreader Plate Kits are designed for installations between joists, for areas being installed as one Zone (area) and come with only one thermostatic controller. Meaning regardless of how big the area/how many rooms, the system will act as one and be controlled as one zone. For multiple room or zone control, please refer to the Fastwarm® Multi Zone Spreader systems.
Fastwarm Aluminium spreader plates are 390mm x 1000mm x 0.5mm (groove depth: 16mm) diffuser plates suitable for joist centres of 400mm and are based at 200m.
Fastwarms 16mm Pert Pipe is fixed in the grooves of the plates, insulation is placed in the void below the plates to minimize downward heat loss and dissipate the heat even across the floor evenly.
FastWarm® Spreader Plate Water Underfloor heating systems are the homeowner and installers perfect choice as each kits comes complete with everything you need in a box with a multiple of different choice of thermostat control. Systems come with an easy-to-follow installation guide and all pipework comes with lifetime (50yr) guarantee. FastWarm® also has a fully qualified technical support team available for on-site queries.
These Single zone water underfloor heating kits are designed to cover the m2 in pipework when spaced at 200mm spacings NB. Pipe is not provided to get to and from from the heat source.
FastWarm® Water Kits include FastWarm® branded products, from pipework, pump, thermostats, manifolds etc as to ensure that seal of quality and approval and reassure the lifetime guarantee that comes with FastWarm® systems. There are many similar systems on the market that are simply
FastWarm® High Output Spreader Plate kits include the following: -
FastWarm® Spreader Plates
Spreader plates are laid across traditional joists and fixed in place using a hand stapler
Fastwarm® Pert Al Pert 5 Layer Pipework
Includes 50 year lifetime guarantee
Fastwarm® Manifold
if 30m2 and above
Grundfos A Rated Pump & Mixing Valve Unit
The ESBE compact T4 thermostatic 4-port pump set is suitable for a maximum output of 18kW.
Choice of Thermostat
We have several thermostats available to fit your budget and lifestyle.
Fastwarm® Pipe Cutter
Suitable for PVC, PP, PPR and PE pipe. Ideal for fitting MDPE and PEX pipes. Cutting capacity 36mm.
This table shows exactly what you'll get in the box based on your chosen kit size.
| Kit Size (m2) | 10 | 12 | 14 | 16 |
|---|---|---|---|---|
| 16mm x 1/2" Male Iron | 2 | 2 | 2 | 2 |
| Isolation/Ball Valve | ||||
| Eurocones (16mm) | ||||
| Fill & Drain Valves | ||||
| Manifold Pump & Mixing Valve Unit | ||||
| Single Circuit Pump & Mixing Valve | ||||
| Manifold Ports | ||||
| Pipe Length (m) | 50 | 60 | 70 | 80 |
| Pipe Cutters | ||||
| Pipe Rounding Tool | ||||
| Spreader Plates | 26 | 31 | 36 | 42 |
| Thermostat | 1 | 1 | 1 | 1 |
| Kit Size (m2) | 18 | 20 | 22 | 24 | 30 |
|---|---|---|---|---|---|
| 16mm x 1/2" Male Iron | 2 | 2 | 2 | 2 | |
| Isolation/Ball Valve | |||||
| Eurocones (16mm) | 4 | ||||
| Fill & Drain Valves | |||||
| Manifold Pump & Mixing Valve Unit | |||||
| Single Circuit Pump & Mixing Valve | |||||
| Manifold Ports | 2 | ||||
| Pipe Length (m) | 90 | 100 | 110 | 120 | 150 |
| Pipe Cutters | |||||
| Pipe Rounding Tool | |||||
| Spreader Plates | 47 | 52 | 57 | 62 | 77 |
| Thermostat | 1 | 1 | 1 | 1 | 1 |
| Kit Size (m2) | 40 | 50 | 60 | 70 | 80 |
|---|---|---|---|---|---|
| 16mm x 1/2" Male Iron | |||||
| Isolation/Ball Valve | |||||
| Eurocones (16mm) | 4 | 6 | 6 | 8 | 8 |
| Fill & Drain Valves | |||||
| Manifold Pump & Mixing Valve Unit | |||||
| Single Circuit Pump & Mixing Valve | |||||
| Manifold Ports | 2 | 3 | 3 | 4 | 4 |
| Pipe Length (m) | 200 | 250 | 300 | 350 | 400 |
| Pipe Cutters | |||||
| Pipe Rounding Tool | |||||
| Spreader Plates | 103 | 129 | 154 | 180 | 206 |
| Thermostat | 1 | 1 | 1 | 1 | 1 |
| Kit Size (m2) | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
|---|---|---|---|---|---|---|---|
| 16mm x 1/2" Male Iron | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Isolation/Ball Valve | |||||||
| Eurocones (16mm) | |||||||
| Fill & Drain Valves | |||||||
| Manifold Pump & Mixing Valve Unit | |||||||
| Single Circuit Pump & Mixing Valve | |||||||
| Manifold Ports | |||||||
| Pipe Length (m) | 50 | 60 | 70 | 80 | 90 | 100 | 110 |
| Pipe Cutters | |||||||
| Pipe Rounding Tool | |||||||
| Spreader Plates | 26 | 31 | 36 | 42 | 47 | 52 | 57 |
| Thermostat | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Kit Size (m2) | 24 | 30 | 40 | 50 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|---|
| 16mm x 1/2" Male Iron | 2 | ||||||
| Isolation/Ball Valve | |||||||
| Eurocones (16mm) | 4 | 4 | 6 | 6 | 8 | 8 | |
| Fill & Drain Valves | |||||||
| Manifold Pump & Mixing Valve Unit | |||||||
| Single Circuit Pump & Mixing Valve | |||||||
| Manifold Ports | 2 | 2 | 3 | 3 | 4 | 4 | |
| Pipe Length (m) | 120 | 150 | 200 | 250 | 300 | 350 | 400 |
| Pipe Cutters | |||||||
| Pipe Rounding Tool | |||||||
| Spreader Plates | 62 | 77 | 103 | 129 | 154 | 180 | 206 |
| Thermostat | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Kit Size (m2) | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 30 | 40 | 50 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 16mm x 1/2" Male Iron | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | ||||||
| Isolation/Ball Valve | ||||||||||||||
| Eurocones (16mm) | 4 | 4 | 6 | 6 | 8 | 8 | ||||||||
| Fill & Drain Valves | ||||||||||||||
| Manifold Pump & Mixing Valve Unit | ||||||||||||||
| Single Circuit Pump & Mixing Valve | ||||||||||||||
| Manifold Ports | 2 | 2 | 3 | 3 | 4 | 4 | ||||||||
| Pipe Length (m) | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 150 | 200 | 250 | 300 | 350 | 400 |
| Pipe Cutters | ||||||||||||||
| Pipe Rounding Tool | ||||||||||||||
| Spreader Plates | 26 | 31 | 36 | 42 | 47 | 52 | 57 | 62 | 77 | 103 | 129 | 154 | 180 | 206 |
| Thermostat | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
- Prepare the joisted subfloor, ideally using a batten attached to joist to accommodate a suitable insulation panel leaving a 20mm void between the top of insulation to the face of the joist.
- Begin laying out the Fastwarm Spreader plate ensuring enough space away from the walls to allow room for the pipes to bend and return in the opposite direction allowing at least 250mm for this.
- Using either staples, nails or screws. Whichever you use, be sure they are secured flush with the surface of the spreader plate onto the joist.
- When running the second spreader plate, leave a 10 mm gap to allow for expansion, ensuring there is not overlap of the plates
- Carry on installing the Fastwarm spreader plates to fill the area repeating the above steps.
- To lay the circuit, cut the pipe end squarely using the plastic pipe cutter, re-round the pipe end with the tool provided, place the nut over the pipe, ensure the olive and insert is fully fitted over the end of the pipe and the assembly is attached to the manifold. Tighten the nut using an open end spanner. Do not over tighten.
- Once all pipe runs are installed fill the system and pressurise using a pressure tester.
- Cover joist with your timber structural subfloor and install floor finish.
- Material
- Fastwarm spreader plate systems are supplied are supplied with Fastwarm spreader plate systems at dimensions of 1000mm x 390mm and a thickness of 0.7mm, providing consistent coverage minimal height build up above the joist
- Groove Design
- Fastwarm spreader plate systems feature a unique design with evenly spaced grooves / channels along its length, allowing for secure placement and optimal distribution of Fastwarm 16mm underfloor heating pipes. The grooves are spaced at 200mm centres, facilitating an easy to install pipe fixing system.
- Surface Finish
- Fastwarm Spreader Plates must be covered with a minimum of 18mm marine ply to ensure correct installation. Above this surface your desired floor finish can be installed such as laminate or engineered woods, tiles, LVT (vinyls) and low tog underlay and carpets (2.5TOG max).
- Compatibility
- Fastwarm spreader plate systems offer the perfect install solution for timber suspended substrates and is compatible with all of Fastwarms 16mm pipework ensuring versatility and ease of installation.
- Installation Guidelines
- Clear installation guidelines shall be provided by the manufacturer to ensure proper handling, placement, and fixing of Fastwarm FastDeck panels, considering best practices for underfloor heating installations.
Free Delivery as Standard!
As standard we include 2 - 3 working day delivery on all orders delivered to the UK mainland. * A £5 delivery charge will be applied to all orders below £20.
Delivery cut off times
Our final delivery time for Mondays to Thursday is 4:30pm. To give us a bit more time to ensure weekend deliveries are handled and our couriers have time to collect, the final delivery time on Fridays is 4:00pm.
2-3 working day delivery
Next working day
Next working day before 10:30
Saturday Delivery
* A £5 delivery charge will be applied to all orders below £20.
Other Delivery Options
Pre 10:30am and Saturday delivery services are available on orders placed before 4:30pm. Any order placed before 4:30pm on a Friday will be delivered on the following Monday (unless its a bank holiday) so please select a Saturday service if a weekend delivery is required.
Delivery outside the UK
Delivery outside the mainland UK may be arranged by prior agreement. You will be notified of the amount of the charge for this service and will at that point have to make a decision whether you wish to proceed wth your order.
Important: Our deliveries rely on third party couriers, so, whilst we make every effort to deliver your order on the specified date and time, unfortunately there may be occasions when this will not be possible due to external influences. Due to this we strongly recommend you ensure you have received your order before any tradespeople/builders are scheduled to commence work.
Still Unsure? Talk to an expert
If you need any guidance or further information our highly experienced team are on hand to help.
Get in touch using our contact form or give us a call on 0800 023 4203 or 01268 744 479.
